Advertisement
OPERATIONS
| WHEN EDITING TAPES
Mi USING THE EQUALIZER
WHEN
PERFORM-
ING TAPE EDITING
[Refer to figure on page 7 [\ij ]
Tape copying from deck 1 to deck 2 while adding
compensation.
Perform the following operations in numerical order.
(1) Set amplifier's Function switch to TAPE 1
(or INPUT SELECTOR
switch to TAPE
1).
((2) Set amplifier's ADAPTOR, TAPE 2 or ADAPTOR/TAPE
2 switch (or TAPE 2 MONITOR
switch) to ON.
@) Set EQUALIZER switch to ON.
() Set TAPE MONITOR switch to OFF.
@® Play back tape.
() Adjust equalizer controls.
@ Set to recording mode.
@® Tape deck 1
TAPE 1
© REC
@® PLAY
©) Stereo amplifier
©) Left channel speaker
© Left (L)
@ Right (R)
@) Right channel speaker
@) ADAPTOR, TAPE 2 or ADAPTOR/TAPE
2
(® EQUALIZER INPUT
© EQUALIZER
OUTPUT
@) TAPE
@) REC
@) PLAY
@®) INPUT (REC)
@ LINE
® OUTPUT (PLAY)
©) Tape deck 2
@) Adjust to desired levels.
® Press to ON.
@) Set to OFF.
{Refer to figure on page 8 [ii] ]
To record from tape deck 2 to tape deck 1 while ad-
ding equalizer compensation
* Depending on the type of amplifier that is used, some of the ex-
planations given here may not apply.
Perform the following operations in numerical order.
@) Set amplifier's ADAPTOR/TAPE 2 switch (or TA-
PE 2 MONITOR
switch) to ON.
When using the amplifier with REC SELECTOR
switch:
REC SELECTOR -> TAPE COPY 2 ® 1
(2) Set EQUALIZER switch to ON.
(@) Set TAPE MONITOR
switch to ON.
@) Play back tape.
©) Adjust equalizer controls.
©) Set to recording mode.
® Tape deck 1
TAPE 1
@©REC
@) PLAY
© Stereo amplifier
©) Left channel speaker
© Left (L)
@) Right (R)
@ Right channel speaker
@ TAPE 2 or ADAPTOR/TAPE
2
® EQUALIZER INPUT
@© EQUALIZER OUTPUT
@) TAPE
() REC
©) PLAY
@®) INPUT (REC)
@ LINE
@) OUTPUT (PLAY)
(S) Tape deck 2
@) Adjust to desired levels.
@ Press to ON.
@) Press to ON.
W In this illustration, the graphic equalizer is connected to the
ADAPTOR/TAPE
2 jack of the amplifier, and the tape deck 2 is
connected to the TAPE jack of the equalizer. The tape deck 1
is connected to the TAPE 1 terminal of the amplifier. With this
setup, copy can be taped from tape deck 2 to tape deck 1, but
make sure the function of the amplifier is set to any position ex-
cept TAPE
1.
15
<ARE1089 >
Advertisement
