Table of Contents
Advertisement
10
Heat the microwaveable heating bag additionally and apply it on the top edge of the
cover screen for 3 minutes.
11
Place the suction cup in the center of the top edge of the cover screen, lift upwards,
and then insert the opening pick in the gap at the top edge.
As the cover screen can be damaged by excessive force, be careful not to
•
damage the cover screen.
As the internal circuitry can be damaged, do not insert the opening pick more
•
than 1–2 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the cover screen to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Disassembly and Assembly
77
Advertisement
Table of Contents
