Table of Contents
Advertisement
Transmitting
Adjust RF
Gain
1
Tune the radio to the channel you want to
transmit on, and listen to make sure the
channel is clear.
Press and hold the PTT. TX displays
2
3
Hold the microphone about 2 inches away from
your mouth and speak in a normal voice.
4
Release the PTT key to listen for a response.
1
Press FUNC and ANL/GAIN to enter RF Gain
Setting mode. The GAIN bar blinks.
2
Turn the CH/RF GAIN knob to adjust Gain
levels (0 - 10). The selected level displays as a
7 segment number and the GAIN bar will blink.
The Gain level number reflects in the number
of Gain bar boxes.
Press FUNC or ANL/GAIN again to store
3
the setting and return to the main operations
screen.
NOTE: RF Gain only applies to AM mode. No RF
Gain levels display in FM or WX modes.
20
Advertisement
Table of Contents
