BMW iX 2024 Owner's Handbook Manual page 160

CONTROLS
Warning light flashes: a warning is issued ac-
tively. The system does not carry out any
steering interventions.
For further information:
Lane Departure Warning, see page 200.
Lane change warning restricted
Depending on equipment and national-
market version:
The system is switched on. No warn-
ings are issued temporarily. At least one func-
tional requirement has not been met, for ex-
ample the minimum speed has not been
reached.
For further information:
Lane Change Warning, see page 204.
Lane change warning switched off
Depending on vehicle equipment and
national-market version: the system is
switched off.
For further information:
Lane Change Warning, see page 204.
White lights
Cruise Control with distance control
No display of distance control as the
accelerator pedal is being pressed.
For further information:
Distance control, see page 236.
Assisted Driving Mode Plus
The system can be activated.
For further information:
Assisted Driving Mode Plus, see
page 247.
160
Displays
Online Edition for Part no. 01405A7AFB2 - II/23
Check Control
Principle
Check Control monitors vehicle functions and
alerts you to any faults in the monitored sys-
tems.
General
A Check Control message is displayed as a
combination of indicator or warning lights and
text messages in the instrument cluster and, if
applicable, in the Head-up display.
An acoustic signal may also be output and a
text message shown on the control display.
Hiding Check Control messages
An arrow symbol next to the Check Control
message indicates whether the Check Control
message can be hidden.
Tilt the knurled wheel on the steering
wheel to the left to hide Check Control
messages.
Continuous display
Some Check Control messages are displayed
permanently and remain until the fault has
been repaired. If a number of malfunctions
have occurred at the same time, the messages
are displayed in succession.
Permanently displayed Check Control mes-
sages may be temporarily hidden. After ap-
prox. 8 seconds, these messages are auto-
matically displayed again.
Temporary display
Some Check Control messages are automati-
cally hidden after approximately 20 seconds.
The Check Control messages remain stored
and can be displayed again.
OwnersManuals2.com