Advertisement
Connecting the Cables
Before connecting any of the cables, make sure that both the printer and the
host computer are turned off.
Connecting the 10BASE-T Ethernet cable
1.
Make sure both the printer and the host computer are turned off.
2.
Plug the 10BASE-T cable connector securely into the UB-E01's 10BASE-T
Ethernet connector until you feel it click.
CAUTION:
Do not connect a telephone line , a display module cable, or a drawer
kick-out cable to the UB-E01's 10BASE-T connector.
Note:
The display module connector on the TM printer cannot be used when the UB-E01 is
installed.
3.
Connect the power supply to the printer.
3
Advertisement
