Electrolux LITE II Owner's Handbook Manual page 6

REPLACING AND CLEANING
THE PROTECTION FILTER AND
HEPA FILTER
• HEPA for air-inlet should be cleaned
at least twice a year or when it
becomes visibly solid.
• Otherwise, reduced suction or motor
damage may result.
• Lift up the dust container by pressing
the locking button on both sides.
Cleaning HEPA for air-inlet
•
Remove HEPA out of base body.
• A severely solid or clogged HEPA
should be thoroughly washed
with fresh tepid water. A neutral
detergent could be used if required.
Caution: Never wash emphatically.
Cleaning and Changing Micro HEPA
for air-outlet
• Rinse filter in lukewarm water and
dry filter completely.
• Put the filter back or change new
filter.
• Close the grille for air-outlet.
How To Store
Your Vacuum
1. Choose a storage location that is both
safe and dry.
2. You can store it in the vertical or
horizontal position, depending on the
space available.
3. The vacuum comes with an onboard
tool coupling for storing the floor nozzle
according to the position chosen, slide
the parking clip onto one of the two
parking positions on the cleaner.
4. Be careful not to trap, twist or tie the
electrical cord; wind it.
5. Keep the extension tubes, nozzles and
hose together to avoid losing them.
6