Driver assistance system
What you see on the screen may dif-
fer from the actual vehicle's location.
僅 The image shown on the screen may
differ from the actual distance of the
object. Make sure to directly check the
vehicle's surroundings for safety.
僅 Surround View Monitor is designed to
be used on a flat surface. Therefore, if
used on roads with different heights
such as curbs and speed bumps, the
image in the screen my not look cor-
rect.
僅 Always keep the camera lens clean. If
the lens is covered with foreign mate-
rial, it may adversely affect camera
performance and Surround View
Monitor may not operate normally.
However, do not use chemical sol-
vents such as strong detergents con-
taining high alkaline or volatile
organic solvents (gasoline, acetone
etc.). This may damage the camera
lens.
7
102
Rear Cross-Traffic Collision-Avoidance Assist (RCCA)
Rear Cross-Traffic Collision-
Avoidance Assist (RCCA) (if
equipped)
Rear Cross-Traffic Collision-Avoidance
Assist is designed to help detect vehicles
approaching from blind spot area while
your vehicle is reversing, and warn the
driver that a collision is imminent with a
warning message and an audible warn-
ing. Also, braking may be assisted to
potentially help prevent a collision.
OCV052075N
[A]: Rear Cross-Traffic Collision Warning
operating range
[B]: Rear Cross-Traffic Collision-Avoid-
ance Assist operating range
CAUTION
The time of warning may vary depend-
ing on vehicle speed of the approaching
vehicle.
Detecting sensor
Rear corner radar
OCV051277N
Refer to the picture above for the
detailed location of the detecting sensor.
OwnersManuals2.com