Indesit DFC 2B+19 AC Daily Reference Manual page 4

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 61
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
HALF LOAD
If there are not many dishes to be washed, a half load cycle may
be used in order to save water, electricity and detergent. Select
the program and press the HALF LOAD button: the indicator light
will light up. Press the HALF LOAD button to deselect this option.
Remember to halve the amount of detergent.
DELAY
It is possible to delay the start time of the program by 2, 4 or
8 hours:
1. After selecting the desired program and any other options,
press the DELAY button. The indicator light will go on.
2. Select the desired delay time by pressing the DELAY button
repeatedly. The 2 hours, 4 hours and 8 hours indicator lights
will go on in succession. If the DELAY button is pressed again,
the option is deselected and the indicator light goes off.
3. After the selection process, the countdown will begin if the
START/PAUSE button is pressed. The selected delay-period
indicator light is on and the Start/Pause button lights up
(fixed light).
4. Once this time has elapsed, the DELAY indicator light goes off
and the program begins.
The DELAY function cannot be set once a program has
started.
4
PUSH&GO
Push&GO button is an easily distinguishable button that allows
you direct access to the Push&GO program, a wash and dry cycle
that ensures great cleaning performance in a short time. You
don't have to worry which program to choose, Push&GO cycle
will do the work for you.
To select Push&GO program, switch on appliance, press only
Push&GO button for 3 seconds.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function can
be used.
A long press of START/PAUSE button, will activate the DRAIN OUT
function. The active program will be stopped and the water in
the dishwasher will be drained out.

Advertisement

Table of Contents
loading

Table of Contents