Table of Contents
Advertisement
Using iriver plus 4
Initializing the Disc
Upgrading the Firmware
1. Connect the device to the computer's USB port and
1. Connect the device to the computer's USB port while
then execute iriver plus 4.
connected to the Intemet and then execute iriver plus 4.
2. Select [Device > Initialize Disc]. When the window
2. Select [Device > Firmware Upgrade], and the
pops up asking whether to proceed with initializing
Upgrade window will be displayed. Complete the
the disc, click [Start].
firmware upgrade by following the instruction window.
3. When the initialization process is finished, the
Complete window will be displayed and the device
can be disconnected from the computer.
a |І there is not enough battery, a firmware upgrade may not be initiated.
ш Never disconnect the device from the computer while a firmware upgrade file
is being downloaded
After the download is finished, the upgrade will be initiated when the device is
disconnected from the computer.
= File recovery will not be possible if files have been deleted from tne device.
If the device firmware is the latest version, a pop-up window will be displayed
Please make sure to perform backup before initializing the disc.
to indicate that it is the latest version,
= Using Initializing the Disc, it is possible to initialize extemal memory
If there is newer firmware version, notification window will be displayed
(memory cara).
automatically when the device is connected to the computer.
28 Other Information
Advertisement
Table of Contents
