Vax MACH5 ALL TERRAIN Instruction Manual page 7

VZL-7015AT Mach5 All Terrain UG.qxd:User Guide
Fig.6/8
The post-motor filter may be rinsed in warm water (max.
40°C). Allow to air dry for 24 hours before replacing.
NOTE: Do not use any detergents or boiling water to
wash the filters. Vax recommends cleaning the filter
every time you empty the dirt container. Vax recommends
washing the filter every 9-12 months.
Once completely dry, return the post-motor filter to the
vacuum cleaner. Replace the post-motor cover before
restarting the vacuum cleaner.
All manuals and user guides at all-guides.com
24/3/09 17:38 Page 7
7. Cleaning Blockages
WARNING: To reduce the risk of electric shock, the
!
power cord must be disconnected before
performing maintenance/troubleshooting checks.
1. Turn the vacuum cleaner off and unplug from the
electrical outlet.
2. The flexible hose can be disconnected from the
vacuum cleaner by turning the hose to the left and
pulling away from the machine. Remove any
blockages found then reconnect the hose securely.
Clearing debris from the TurboTool
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Press the latches on both sides of the tool and remove the
bottom plate (Fig.7/1).
Fig.7/1
Remove any blockage (Fig.7/2).
Fig.7/2
Vax Careline 0870 606 1248
7
clearing blockages