Table of Contents
Advertisement
NETWORKSETUP
WirelessWPSnetworkconnectionby
pressingabutton
1
Open the menu with »MENU«.
2
Press »
« or »
V
Λ
>
press »
« to confirm.
3
Press »
« or »
V
Λ
Network« and press »OK« to confirm.
4
To approve the Privacy Policy, press »
>
»
« to select »Accept« and press »OK« to
confirm.
– » Wi-Fi Network« menu will be displayed.
5
According to your network infrastructure,
press »
« or »
V
Λ
»IPv6« and press »OK« to set »On«.
Note:
To access the internet through IPv6, your
7
internet service provider and modem must
support IPv6. If only the modem supports
IPv6, it can only connect to the modem; you
cannot connect to internet.
6
Press »
« or »
V
Λ
and press »OK« to confirm.
– W ireless networks will be scanned and
displayed in the »WIFI List« menu.
7
Press »
« (blue) for the WPS connection.
8
Press »
« or »
V
Λ
and press »OK« to confirm.
9
Press the WPS button on the router.
10
After pressing the WPS button on the access
<
point, press »
« or »
and press »OK« to confirm.
11
Press »
« (green) to make sure that the
network connection is established with the
current settings.
– » Connecting ... « message will be
displayed and if the connection is
successful, »Connect Success« message
will be displayed.
12
Press »EXIT« to finish the setting.
- ------------------------------------------------------------------------------------------
« to select »Network« and
« to select »Wireless
<
« to select »IPv4« or
« to select »Base Station«
« to select »WPS-PBC«
>
« to select »Continue«
WirelessWPSnetworkconnectionwith
PIN
1
Open the menu with »MENU«.
2
Press »
V
>
press »
3
Press »
V
Network« and press »OK« to confirm.
« or
4
To approve the Privacy Policy, press »
to select »Accept« and press »OK« to confirm.
– » Wi-Fi Network« menu will be displayed.
5
According to your network infrastructure,
press »
V
»IPv6« and press »OK« to set »On«.
Note:
To access the internet through IPv6, your
7
internet service provider and modem must
support IPv6. If only the modem supports
IPv6, it can only connect to the modem; you
cannot connect to internet.
6
Press »
V
and press »OK« to confirm.
– W ireless networks will be scanned and
displayed in the »WIFI List« menu.
7
Press »
8
Press »
V
press »OK« to confirm.
– 8 -digit pin code is displayed in the
wireless WPS menu.
Note:
Refer to the manual of your router to find
7
out how the PIN is entered via a PC.
9
Use a computer to enter PIN to the router (e.g.
AVM FRITZ!Box: menu item WLAN Settings...
WPS) and save.
Note:
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise,
connection of television with the modem is cut.
10
To approve the saving process, press »
>
»
« to select »Continue« and press »OK«
to confirm.
– » Connecting ... « message will be displayed
and if the connection is successful, »Connect
Success« message will be displayed.
11
Press »EXIT« to finish the setting.
« or »
« to select »Network« and
Λ
« to confirm.
« or »
« to select »Wireless
Λ
« or »
« to select »IPv4« or
Λ
« or »
« to select »Base Station«
Λ
« (blue) for the WPS connection.
« or »
« to select »WPS-PIN« and
Λ
ENGLISH
<
>
« or »
«
<
« or
63
Advertisement
Table of Contents
