Table of Contents
Advertisement
¡ Recommended oblong cookware
As two separate cooking zones
Recommended for cooking with two items of cook-
ware.
You can use the front and rear zone independently of
one another, and set a separate power level for each
zone.
MoveMode
8 MoveMode
M
-
e
v
o
You can use this function to change the power level of
d
e
M
o
an item of cookware by simply sliding it forwards or
backwards in the flexible cooking zone. The zone is di-
vided into three areas with different power levels.
8.1 Positioning and moving the cookware
Only use one item of cookware. The cooking area de-
pends on the cookware used, as well as its size and
positioning.
Each cooking area has a preset power level:
¡ Front area = power level
¡ Middle area = power level
¡ Rear area = power level .
:
7.2 Switching on FlexInduction
1.
2.
a The cooking zones split or connect automatically
a The FlexZone is connected and
Notes
¡ By touching
¡ You can change the default configuration of the flex-
¡ If you move or lift the cookware from an active con-
You can change the standard setting of the preset
power levels. You can find out how to do this in the
"Basic settings" section → Page 14.
8.2 Activating MoveMode
Requirement: Only place one item of cookware on a
flexible zone.
1.
2.
a The power level in the area in which the cookware
Place the cookware on the cooking zone.
Select the cooking zone.
depending on the size and position of the cook-
ware.
, you can manually change the set-
tings for the cooking zone.
ible cooking zone. You can find out how to do this
in the "Basic settings" section. → Page 14
nected cooking zone, an automatic search starts.
Each item of cookware that is found within the cook-
ing zone during this search is heated at the previ-
ously selected power level.
Select one of the two cooking zones in the flexible
zone.
Press
.
is located lights up in the cooking zone display next
to
.
MoveMode en
lights up.
9
Advertisement
Table of Contents
