Tuning Analogue Television C Hannels - Grundig 22 VLE 4520 BM User Instructions

SPECIAL­SETTINGS
­ T uning­analogue­television­
­ c hannels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channels can be set directly or
using the scan.
Switching­the­television­to­
­ a nalogue­reception
Note:
Analogue channels can be selected if the
7
option »Air« or »Cable« has been selected.
1 Open the »Select input source« menu with
» «.
2 Depending on the antenna system, select the
option »Air« or »Cable« with »
>
or » « as the input source and press »OK«
to confirm.
Note:
Additional operations are explained in the
7
following sections.
Setting­all­analogue­television­
channels
Analogue channels are displayed in the channel
list after the digital channels.
Note:
Plug the rooftop antenna cable (for analogue
7
television channels) into the »ANT­IN«
socket on the television.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
» « or » « and press »OK« to confirm.
V Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »OK« to confirm.
Select the option »Air« or »Cable« with »
>
» «, » « or »
V Λ
firm.
­ 5 6
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------
«, »
V Λ
« or »
V
« and press »OK« to con-
4 Select the line »Automatic Channel Search«
with »
V
Source
Automativ Channel Search
Digital Manual Tuning
Analogue Manual Tuning
Program Table
Signal Information
Automatic Service Update
CA - Modul
Active Antenna Power
<
«, » «
5 Select the line »Scan Typ« with »
and set the option »ATV« with »
6 Start the scan with »
Note:
After starting the scan, a security query will
7
appear. Press »
option »Yes«.
– A ll channel and favourites lists for the ana-
logue channels will be deleted and com-
piled anew.
– T he »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– T he search is complete as soon as the »PRO-
GRAM TABLE« appears.
Note:
«
Λ
You can abort the search by pressing
7
»EXIT«.
<
«,
7 Press »EXIT« to end the setting.
« or » « and press »OK« to confirm.
Λ
SOURECE SETUP
Not inserted
Exit
Back
« (red).

« (green) to confirm the

20.09.2010
15:46
Air
OK
On
Off
« or » «
V Λ
< >
« or » «.