Echo CS-310 Operator's Manual page 23

CS-310
Instructions to Install Optional Kick Guard
Tools Needed: Two 11 mm (7/16 in.)
Wrenches.
1. Install bolt (A) in rear hole (B) of
kick guard and through front
hole (C) in guide bar.
2. IMPORTANT: Dimple (D) in tip
guard must engage recess (E)
in guide bar.
3. Securely tighten nut (F) and
bolt (A).
Guide Bar and Saw Chain Installation/Removal
1. Release the cylinder cover latches, and remove the cylinder cover.
2. Remove spark plug lead.
3. Remove sprocket guard nuts
(A) and remove sprocket guard
(B).
4. Remove guide bar and saw
chain if necessary.
X7533271300
© 11/23 ECHO Incorporated
TM
to Bar
D
E
F
Unlock chain brake
ASSEMBLY
A
B
C
A
B
23