Samsung HT-C6930W User Manual page 26

HDMI IN i Cennect!ng to an External Component with an HDMI Cable
1. Connect an HDMI cable (not supplied)from the HDMI IN jack on the back of the product to the HDMI OUTjack
on your digital device,
2. Pressthe FUNCTION button to select HDMI. IN1 or HDMI. IN2 input,
The mode switches as follows : BD/DVD ._ D. IN ._ AUX ._ HDMI. IN1 ._ HDMI. IN2 ._ FM
HDMI Auto Detection Function
If you have connected your home theater by HDMI cable, the home theater's video output
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions,
see page 35.
o This function is not available if the HDMI cable does not support CEC.
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
What is the HDCP?
HDCP (High-bandwidth DigitalContent Protection)is a system for preventingBD/DVD content outputted via
HDMIfrom being copied It provides a secure digital linkbetween a video source (PC, DVD,etc) and a display
device _, projector, etc), Content is encrypted at the source device to prevent unauthorizedcopies from being
made,
! CAUTION
_ TheAnynet+functionis supportedonlywhen an HDMICableis connectedto the HDMIOUTof the
product.
FM Antenna (supplied)
1. Connect the FM antenna supplied to the
FM 750 COAXIAL jack.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
_. NOTE
_ This product does not receive AM
broadcasts.
26 English