Advertisement
WHAT TVPE OF INPUTS AND OUTPUTS CAN
BE USED?__
• There are three different ways you can get signal to your
amplifier; RCA, DIN and High Level Input. Regardless of your
source unit, ORION has provided an input configuration to
maximize the performance of your system. You can also use
different combinations of RCA, DIN and High Level Inputs and
Outputs. Listed are different ways to get audio signal in and out
of your amplifier.
RCA INPUTS AND OUTPUTS CONFIGURATION
• RCA signal input range to make full power; 1 50mV RMS to 5 V
RMS.
• RCA left and right inputs are the main inputs for the amplifier.
• RCA's AUX are programmable. See Setting Signal Jumper section
of this manual.
• Maximum RCA output 8 V RMS when using internal gain stage.
RIGhrr
RIGHT
CHANNEL
CHANNEL
AUX
INPUT
LEFT
LEFT
CHANNEL
CHANNEL
AUX
INPUT
OUTPUT FOR ANOTHER
AMPLIFIER/5
FROM SOURCE UNIT OR
ANOTHER SIGNAL OUTPUT
DIN INPUTS, OUTPUTS AND PHANTOM
POWER
• DIN signal input range to make full power: ISOmV RMS to 5 V
RMS,
• DIN AUX is programmable.
• Maximum DIN output 8 V RMS when using internal gain stage.
• 15 Volt Rails can supply "Phantom Power" to ORION accessories.
• Ground is used for power ground for Phantom Power and audio
ground for both DIN audio input and outputs.
RIGHT
RIGHT
CHANNEL
CHANNEL
AUX
INPUT
LEFT
LEFT
CHANNEL
CHANNEL
AUX
INPUT
OUTPUT FOR ANOTHER
AMPLlFIEFl/5
FROM SOURCE UNITOR
ANOTHER SIGNAL OUTPUT
Advertisement
