Table of Contents
Advertisement
22
INSTALLATION OF HEATER AND FLUE PIPE
NOTE:
Check and comply with all state and local codes that may apply to vented heaters before beginning
installation
NOTE:
This heater is designed to be used no more than 3000 FT. above sea leveL
ASK your local dealer for using at altitudes higher than 3000 FT. above sea leveL
Select heater location . . Allow clearances as indicated below between heter and all other materials.
(See Fig . . 1)
More than 5 ft
Fig
1
2..
Make sure that the outside area to where the standard flue pipe will be reach is clear of any objects
(See Fig 2 & 3)
NOTE:
Make sure wall thickness is not greater than 10 inches . . If it is more than 10 inches, consult with your
local dealer . . A longer flue pipe will be available through your dealer or distributor . .
Combustible object
Not less than 2 ft
Not less
than 1ft
Flue pipe
t
'
..
,.
•
Not less
than 8 in
Fig
2
Not less
than 2
It
'.'
Not less
than 1 5 ft
Not less
than 1 5 ft
• ,
I
I
Fig. 3
Advertisement
Table of Contents
