Table of Contents
Advertisement
READ
INSTRUCTIONS
—
All
the
safety
and
operating
instructions
should
be read before
the
appliance is operated.
RETAIN
INSTRUCTIONS
— The operating instruc-
tions should be retained for future reference.
HEED
WARNING
—
All warnings
on the appliance
and in the operating instructions should be adhered
to.
FOLLOW
INSTRUCTIONS
— All operating and use
instructions should be followed.
WATER
AND
MOISTURE
—
The appliance
should
not be used
near water
—
for example,
near
a
bathtub, washbowl, kitchen sink, laundry tub, ina
wet basement,
or near
a swimming
pool, etc.
LOCATION
—
The appliance should be installed in a
stable location.
WALL
OR
CEILING
MOUNTING
—
The
appliance
should not be mounted to a wall or ceiling.
VENTILATION
— The appliance should be situated so
that its location or position does not interfere with
its proper ventilation.
For example,
the appliance
should
not
be situated
on
a bed,
sofa,
rug,
or
similar surface that may block the ventilation open-
ings; or, placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of
air through the ventilation openings.
HEAT
—
The appliance should be situated away from
heat
sources
such
as
radiators,
heat
registers,
stoves,
or other appliances
(including
amplifiers)
that produce heat.
POWER
SOURCES
—
The appliance should
be con-
nected to a power supply only of the type describ-
ed in the operating instructions or as marked on the
appliance.
POWER-CORD
PROTECTION
—
Power-supply cords
should be routed so that they are not likely to be
walked
on
or pinched
by items
placed
upon
or
against them, paying particular attention to cords
at plugs,
convenience
receptacles,
and the point
where they exit from the appliance.
The
lightning
flash
with
arrowhead,
within an equilateral triangle, is intended
to alert
the
user
of the
presence
of
uninsulated
''dangerous voltage' within
IMPORTANT
[FOR KU MODEL]
SAFETY
INSTRUCTIONS
[FOR KU MODEL]
CLEANING
—
The appliance should be cleaned
only
with a polishing
cloth or a soft dry cloth.
Never
clean with furniture wax,
benzine,
insecticides or
other volatile liquids since they may
corrode
the
cabinet.
POWER
LINES
—
An
outdoor
antenna
should
be
located away from power lines.
NONUSE
PERIODS
—
The
power
cord
of the ap-
pliance should be unplugged from the outlet when
left unused for a long period of time.
OBJECT
AND
LIQUID
ENTRY
—
Care should be
taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
DAMAGE
REQUIRING
SERVICE
— The appliance
should
be serviced by Pioneer authorized
service
center or qualified service personnel when:
©
The
power-supply
cord
or
the
plug
has
been
damaged; or
¢
Objects have fallen, or liquid has been spilled into
the appliance; or
¢
The appliance has been exposed to rain; or
¢
The appliance does not appear to operate normally
or exhibits
a marked change in performance;
or
e
The appliance has been dropped; or the enclosure
damaged.
SERVICING
— The user should not attempt to service
the
appliance
beyond
that
described
in
the
operating instructions. For all other servicing, con-
tact the nearest Pioneer authorized service center.
OUTDOOR ANTENNA GROUNDING
— If an outside
antenna
is connected
to the antenna
terminal, be
sure the antenna system is grounded so as to pro-
vide some
protection
against voltage surges and
built up static charges.
In the U.S.A. section 810 of the National Electrical
Code, ANSI/NEPA
No. 70-1981, provides informa-
tion with respect to proper groundig of the mast
and supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of groun-
ding
conductors,
location
of antenna-discharge
unit, connection
to grounding electrodes,
and re-
quirements for the grounding
electrode.
See Fig.
A.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DG
NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
a)
b)
c)
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE INSTRUC-
TIONS
Ground
clamp
a), b)
Mast
ground
wire
To Antenna terminal
—
Ground
wire
Ground
clamps
it
Grounding electrode
driven 8' into the earth
(2.44 meters)
Fig. A
Use No. 10 AWG (5.3 mm?) copper or No. 8 AWG
(8.4 mm?) aluminum or No. 17 AWG
(1.0 mm?)
copper-clad
steel
or
bronze
wire,
or
larger as
ground wires for both mast and lead-in.
Secure
lead-in
wire
from
antenna
to
antenna
* discharge unit and mast ground wire to house with
stand-off
insulators,
spaced from 4 feet (1.22
meters) to 6 feet (1.83 meters) apart.
Mount antenna discharge unit as closely as possi-
ble to where lead-in enters house.
exclamation
point
within
an
equilateral triangle is intended to alert the
of
the
presence
of
important
operating and maintenance (servicing) in-
structions in the literature accompanying
the appliance.
TO QUALIFIED SERVICE PERSONNEL.
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
IMPORTANT
To prevent electric shock, do not remove
cover.
No user ser-
viceable parts inside, refer servicing to qualified service personnel.
Always disconnect all the equipment from the mains supply when
disconnecting the signal leads. The power cord should be con-
nected last, make sure that the power switch is off.
Unplug the set from the wall socket when it is not to be used for an
extended period of time.
FOR USE IN UNITED KINGDOM
AND AUSTRALIA
CAUTION 240 V:
FOR USE IN UNITED KINGDOM
The wires in this mains lead are coloured in accordance with the
following cord:
Blue:
Neutral
Brown:
Live
As the colours of the wires in the mains lead of this apparatus may
not correspond
with the coloured
marking
identifying the ter-
minals in your plug proceed as follows:
The wire which is coloured biue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the ter-
minal which is marked with the letter L or coloured red.
Equipment
sold in the U.K. is not supplied with a power
plug.
:
Mains supply voltage is factory
adjusted at 240 V.
Advertisement
Table of Contents
