Table of Contents
Advertisement
One Time Setup
When the Combination VCR is turned on the
Process of Setup
first time, setup mode is entered automatically.
¡ETE
> Re El TR >
Mello:
Press POWER on the
Combination VCR.
SELECT LANGUAGE
Select the language.
1 POWER
PUSH
CH A
:English
for English
OPRIMIR CH ¥ :Español
for Spanish
= 2 CHANNEL
APP.
VOL + :Frangais
(Español)
- UP/DOWN
for French
3
(Francais)
* If wrong language is set, do
VOLUME
"Reset all Combination VCR
UP
Memory Functions" steps page 34.
* If you use a cable box, the cable
box must be left on.
Start Channel Auto Set
NN
A
|
CHANNEL CLOCK AUTO SET
and Clock Auto Set.
CONNECT
ANTENNA
CABLE
BOX, TUNE IT 70 YOUR
. | Press CHA.
LOCAL PBS CH
THEN...
A
-
PLEASE PUSH CH UP KEY
Sar
| CH AUTO SET PROCEEDING
|
AUTO CLOCK SET
PROCEED ING
Case 1 y
Case 2
(Setup completed)
(Setup incomplete)
l
Press CH A to exit.
See Case 2
7/28/1999 HED 12:00PM
A
* [f your area observes
next page.
SETTING : CH 10
=
daylight saving time, but
AUTO CLOCK SET
E
you would like to turn the
AUTO
CLOCK
SET
DST feature off, do the
IS
INCOMPLETE
COMPLETED
Reset Clock steps on
* If your area observes daylight saving time
and DST is set to ON, but the time is
incorrect; do the Time Zone Adjust steps
on the next page.
IMPORTANT NOTE FOR AUTO CLOCK SET
* Auto clock set is performed the first time when Combination VCR is turned off each day. If used, a cable box must be left
on and tuned to the PBS channel at the time Combination VCR power is turned off if you want auto clock set to be done.
* If using, a DSS receiver, it must be turned off for auto clock set.
* If Cable Box or DSS receiver is connected to Combination VCR via Audio/Video Jacks, an RF coaxial cable must also
be connected for auto clock set and channel auto set features.
* if for any reason the time is changed manually, automatic time correction will not occur.
6
For assistance, call 1-800-211-PANA(7262)
Advertisement
Table of Contents
