Safety Information - Pioneer VSX-D906S Service Manual

VSX-D906S, VSX-07TX, VSX-09TX
1. SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING
Lead in solder used in this product is listed by the California Health and Welfare agency as a known reproductive toxicant which
may cause birth defects or other reproductive harm (California Health & Safety Code, Section 25249.5).
When servicing or handling circuit boards and other components which contain lead in solder, avoid unprotected skin contact with
the solder. Also, when soldering do not inhale any smoke or fumes produced.
NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols -§F—+ (fast operating fuse) and/or -§F—¥ (slow operating fuse) on PCB indicate that replace-
ment parts must be of identical designation.
REMARQUE
(POUR MODELE CANADIEN SEULEMENT)
Les symboles de fusible E—+ (fusible de type rapide) et/ou -—§E—* (fusible de type lent) sur CCI indiquent
que les piéces de remplacement doivent avoir la méme désignation.
(FOR USA MODEL ONLY)
technician.
LEAKAGE CURRENT CHECK MUST BE CORRECTED BEFORE RETURN-
Measure leakage current to a known earth ground ING THE APPLIANCE TO THE CUSTOMER.
(water pipe, conduit, etc.) by connecting a leakage
current tester such as Simpson Model 229-2 or 2. PRODUCT SAFETY NOTICE
special safety characteristics are identified in this
Service Manual.
Electrical components having such features are
Sapekiige identified by marking with a .!. on the schematics and
ae 0.5mA
on the parts list in this Service Manual.
Gevies er The use of a substitute replacement component which
under dose not have the same safety characteristics as the
ie PIONEER recommended replacement one, shown in the
parts list in this Service Manual, may create shock, fire,
or other hazards.
Product Safety is continuously under review and new
instructions are issued from time to time. For the latest
information, always consult the current PIONEER
Service Manual. A subscription to, or additional copies
eRe ne nes san of, PIONEER Service Manual may be obtained at a
plug as required) * ground
nominal charge from PIONEER.
AC Leakage Test
Leakage
Test all
exposed metal
surfaces
Also test with
http://www. ManualsCenter.com