Table of Contents
Advertisement
since they can scratch the surface, which may
result in shattering of the glass.
• Use soapy water to thoroughly clean the oven
door. Rinse well. Do not immerse the door in
water.
• You may use a glass cleaner on the outside glass
of the oven door. Do not spray water or glass
cleaner on the door vents.
• Do not use oven cleaners, cleaning powders, or
harsh abrasive cleaning materials on the outside
of the oven door.
• Do not clean the oven door gasket. The oven
door gasket is made of a woven material that is
essential for a good seal. Care should be taken
not to rub, damage, or remove this gasket.
a
Don't hand clean oven door gasket
b
Do hand clean door
Oven Racks
Remove the oven racks before operating the
Pyrolysis cycle and EasyClean.
1
Clean with a mild, abrasive cleaner.
• Food spilled into the tracks could cause the
racks to become stuck.
2
Rinse with clean water and dry.
NOTE
If the racks are cleaned using the Pyrolysis cycle
(not recommended), the color will turn slightly blue
and the finish will become dull. After the Pyrolysis
cycle is complete, and the oven has cooled, rub the
sides of the racks with wax paper or a cloth
containing a small amount of vegetable oil. This will
make the racks glide more easily into the rack
tracks.
EasyClean
LG's EasyClean enamel technology provides two
cleaning options for the inside of the oven. The
EasyClean feature takes advantage of LG's new
enamel to help lift soils without harsh chemicals,
and it runs using ONLY WATER for just 10 minutes
in low temperatures to help loosen LIGHT soils
before hand cleaning.
While EasyClean is quick and effective for small
and LIGHT soils, the Pyrolysis feature can be used
to remove HEAVY, built up soils. The intensity and
high heat of the Pyrolysis cycle may result in
smoke which will require the opening up of
windows to provide ventilation. Compared to the
more intense Pyrolysis process, your LG oven
gives you the option of cleaning with LESS HEAT,
LESS TIME, and virtually NO SMOKE OR FUMES. You
can reduce energy use by cleaning light oven soils
with the EasyClean feature instead of Pyrolysis.
When needed, the oven still provides the Pyrolysis
option for longer, more thorough oven cleaning for
heavier, built up soils.
• For hard to reach areas such as the back surface
of the oven, it is better to use the Pyrolysis cycle.
Benefits of EasyClean
• Helps loosen light soils before hand-cleaning.
• EasyClean only uses water; no chemical
cleaners.
• Makes for a better Pyrolysis experience.
- Delays the need for a Pyrolysis cycle
- Minimizes smoke and odors
- Can allow shorter Pyrolysis time
MAINTENANCE
55
Advertisement
Table of Contents
