Personal Computer - Philips 15PF9925 - annexe 1 Manual

Headphone
• •
PC INPUT
DC 12V ANT IN
_
+

Personal computer

• •
ANT IN PC INPUT
DC 12V
_
+
&
Connect one end of a (male to male)
VGA cable to the video card of the
computer and the other end to the VGA
connector
PC INPUT
TV. Fix the connectors firmly with the
screws on the plug.
Note: the VGA cable is not supplied with the
TV.
é
In case of a Multimedia computer, connect
the audio cables to the audio outputs of
your Multimedia computer and to the
and
AUDIO L
input of the TV.
"
Press the w key on the remote control
or select
Source
p. 12) to select PC.
'
Switch on the computer.The TV can be
operated as the computer monitor.
Note: If you have an Apple Macintosh
computer, connect the VGA desktop block from
the 3 row 15 pin to 2 row 15 pin with the
signal cable and connect the VGA desktop
block to the Apple Macintosh computer.
............
...........
VIDEO
w 1 L
S-VIDEO
• •
• • • •
............
...........
VIDEO
w 1 L
S-VIDEO
• •
• • • •
at the back of the
connectors of the
R
in the Special menu (See
&
Insert the plug into the headphone socket L
at the back of the TV.
é
Press the ¬ key on the remote control to
switch off the sound from the headphone and
the internal loudspeakers of the TV.
"
Press the cursor left/right to adjust the volume.
L AUDIO R
(MONO)
AV2
Monitor Display modes
MODE Resolution Horizontal
VGA 640x480
640x480
640x480
L AUDIO R 640x480
(MONO)
AV2
640x480
720x400
SVGA 800x600
800x600
800x600
800x600
800x600
(MAC) 832x624
XGA 1024x768
1024x768
1024x768
1024x768
Note:
- If the set is cold, there may be a small "flicker"
when the set is switched on. This is normal, there is
nothing wrong with the set.
AV2
- If possible, use the VESA 1,024x768@60Hz video
mode to obtain the best image quality for your
LCD monitor. If used under the other resolutions,
some scaled or processed pictures may appear on
the screen. The TV has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
- Some dot defects may appear on the screen, like
red, green or blue spots. However, this will have no
impact or effect on the monitor performance.
- Do not press the LCD screen with your finger for a
long time as this may incur some afterimages.
Connect peripheral equipment
Vertical
Frequency (KHz) Frequency (KHz)
31,5 KHz 60Hz
35 KHz 67Hz
37,9 KHz 72Hz
37,5 KHz 75Hz
43,3 KHz 85Hz
31,5 KHz 70Hz
35,2 KHz 56Hz
37,9 KHz 60Hz
48,1 KHz 72Hz
46,9 KHz 75Hz
53,7 KHz 85Hz
49,7KHz 75Hz
48,4KHz 60Hz
56,5KHz 70Hz
60,2KHz 75Hz
68,7KHz 85Hz
17