Setting The Time And Date - Philips 14PV220 Manual

i f h
Repeat steps to
programme number to all TV channels you wish to
allocate.
j
To stop the allocation, press the
k
To exit the main menu, press the

Setting the time and date

D If a TV channel which transmits Teletext/PDC is
stored under programme number 'P01', time and
date will automatically be taken from the
Teletext/PDC information.
D The next section 'Automatic setting of time/date
(SMART CLOCK)' will show you how to turn 'SMART
CLOCK' on and off.
a
Press the button on the remote control. The main
MENU
menu will appear.
b
Select the line 'CLOCK' using the
buttons and confirm this selection with the button
.
SqP
CLOCK
YEAR
MONTH
DATE
TIME
SMART CLOCK
...
†
c
Check the year displayed in the line 'YEAR'. If required,
please change the year with the number buttons
the remote control.
d
Select the next line with
e
Check 'MONTH', 'DATE' and 'TIME' in the same way.
f
When all information is correct, confirm with
'STORED' will briefly appear on the display.
g
To end, press the
MENU
until you have given a
button.
MENU
button.
MENU
or
=P r ;P q
2001
W X
01
01
20:00
ON
STORE: OK
0..9
;P q or =P r .
.
OK
button.
Automatic time and date setting
(SMART CLOCK)
If a TV channel which transmits TELETEXT/PDC information is
stored under programme number 'P01', the time and date are
automatically set by the TELETEXT/PDC information.
D The time will automatically be adjusted to winter
time and summer time.
a
Press the
MENU
menu appears.
b
Select the line 'CLOCK' with the button
and confirm with the
;P q
Select the line 'SMART CLOCK' with the button
c
or
=P r ;P q
d
Select 'ON' (SMART CLOCK switched on) or 'OFF'
(SMART CLOCK turned off ) 'using the buttons
or
QSr SqP
e
Use the button to store this information.
OK
'STORED' will briefly appear on the display.
f
To end, press the
on
button on the remote control. The main
=P r
button.
SqP
.
.
button.
MENU
or
9