Table of Contents
Advertisement
Installation
01 70 mm
Placing the accessory hose over a wash basin
20
English
Untitled-14 20
2. Insert one end of the accessory hose (long drain
hose) into drain water outlet (A).
3. Place the other end (outlet) of the accessory hose at
least 70 mm away from a drain hole.
1. Make sure to place the end of the accessory hose
lower than 90 cm (*) from the bottom of dryer.
2. To bend some point of the accessory hose, use the
supplied plastic hose guide (B) and secure the guide
to the wall with a hook or to the tap with a piece of
string. Assemble the drain hose (A) and the hose
guide (B) and fix them with the cable-tie (C).
3. You can drain the condensed water by connecting the
accessory hose (long drain hose) to the drain-outlet
A
directly.
CAUTION
Do not extend the drain hose. Water may leak from the
connected area. Use a long drain hose.
B
C
2023-07-18
5:16:37
Advertisement
Table of Contents
