Table of Contents
Advertisement
7
Caution for Disassembly/Assembly of CD MECHA.
1. As for the distinction method of Carriage100, 200, and 300,
Switch distinguishes the shape of the projection part on its back.
Please confirm the number seal pasted to the surface of
Carriage and the projection shape of the figure below when you
exchange it.
Carriage 100
Carriage 200
Method of distinguishing the back of Carriage.
Method of distinguishing surface of Carriage.
2. Please do not disassemble Assy Holder L, R and the inside of
and Drawer, and do not disassemble Assy Gear Drive which
connects Assy Holder L with R.
(The position match of each gear is necessary)
3. Please do not lose the gear (Bevel Gear 4 and Gear Idler A) not
fixed while put in the axis.
Carriage 300
1
Carriage 100
Assy Holder L
2
Carriage 200
3
Carriage 300
4. Carriage 300 is put in the Chassis side, and please put in the
Drawer side without fail in order of Carriage 100 and 200.
Carriage 100, 200
Drawer
Bevel Gear 4
Drawer
Assy Gear Drive
Gear Idler A
Carriage 300
XR-MT3
Assy Holder R
Chassis
47
Advertisement
Table of Contents
