Connecting The Ac Power Supply - Crate Studio Module SM5-HP User Manual

SM5-HP

Connecting the AC Power Supply:

A
9-10 VAC
50-60 Hz
500mA MINIMUM
B
A) Slide the power adapter cable into the cord cinch as shown above, leaving a few inches
of cable between the cinch and the cable's small metal barrel connector.
B) Plug the barrel connector into the power supply jack.
C) After all other connections are made, plug the power pack into a suitable source of AC
line voltage. (See the sticker on the power adapter for voltage requirements.)
NOTE: Since the SM5-HP is "always on" when the power pack is plugged in to a
live outlet, it is advised that you unplug the power pack (or turn off the AC source)
when not using the unit for extended time periods.
Muting Feature Note: The SM5-HP incorporates a muting circuit which can
silence an output jack whenever its level control is at or very near the fully
counter clockwise position. A soft "click" will be heard through the headphones
when the muting circuit is engaged.
Five Channel Headphone Amplifier
LEFT RIGHT
(STEREO) (MONO)
9-10 VAC
50-60 Hz
500mA MINIMUM
C
5