Motorola HS801 User Manual page 10

Manuel Casque HS801
Pairing your headset and phone
You must pair your headset and phone before you can make a call.
"Pairing" creates a link between devices equipped with Bluetooth wireless technology and allows
the phone to remember the headset's unique ID. Once your headset and phone are paired, your
headset automatically connects to your phone.
Pairing
With the headset and phone in close proximity:
Step 1: Press and hold one of the volume buttons until the headset indicator lights on
permanently.
Step 2: Perform a device discovery (or scan) from the phone. For details about device
discovery consult your phone's user guide.
Step 3: Select the Motorola headset in the list of discovered devices and confirm by
following the on-screen prompts.
Step 4: When requested by the phone, enter the passkey 0000 and confirm.
Paired link to additional devices
Your headset can store pairing information for up to eight different devices equipped with Bluetooth
wireless technology. Devices are stored in a "Paired Device List" in memory in chronological order.
When an attempt to pair to more than eight devices is made, the oldest paired device is removed
from the list.
Any of the eight paired devices can initiate a paired connection to the headset.
To connect the headset to the last device it was connected to, press the multifunction button for
approximately 2 seconds. If you want to connect the headset to another device in the paired device
list, you must initiate the connection from that device. Whichever of the eight devices initiates a
connection to the headset afterwards, that device then becomes the "last connected" device.
19/03/2004 14:07 Page 10
English
7