Philips NORELCO SP9883 Manual page 8

8
English
- Never use the product, charging pad or USB power source if it is
damaged, if it is not working properly or after it has been
dropped or damaged. Never use the charging pad or USB power
source after it has been dropped into water. For assistance call
1-800-243-3050.
- Keep the USB power source and the charging pad away from
heated surfaces
- Never drop or insert any object into any opening.
- Do not use the USB power source in or near a power outlet that
contains an electric air freshener to prevent damage to the USB
power source.
- Do not charge product or plug in charging pad outdoors or
operate where aerosol (spray) products are being used or where
oxygen is being administered.
- Always check cutters, cutting unit and guards before using the
product. Do not use the product if cutters, cutting unit or guards
are damaged, as injury may occur.
- Always attach USB power source to charging pad first, then to
power outlet. To disconnect, remove USB power source from
power outlet.
- Plug USB power source directly into power outlet. Do not use an
extension cord.
- Unplug USB power source before plugging in or unplugging the
charging pad.
- The charging pad is not intended for use in a car. It may interfere
with the automotive electronic systems.
- The batteries used in this product may present a fire or chemical
burn hazard if mistreated. Do not disassemble, heat above
100 °C (212 °F) or incinerate.
- Only use original Philips accessories or consumables. Only use
detachable power source HQ87 and charging pad HQ8510.