Table of Contents
Advertisement
SYNCHRONIZATION'
Speed
Settings
There are three letters engraved on the side of the
shutter housing; M and X are synchronizer settings
for flash, V is the self-timer setting. These settings
are adjusted by moving the
SELECTOR
lever (illus-
trated)
after first depressing the
VXM LOCK.
M·2, M·25
or
AG·l
Lamps-Set the
synchronizer
selector at X. Set the shutter at from 1 to
1/
30 sec-
ond. Consult the exposure calculator on the flash-
older or the table on page 21 for exposure informa-
tion.
Lamps
such
as
M·5,
No.5 or No.
25-With
the
synchronizer selector set at M, exposures can be
made from 1 second to
1/
500 second. See the table
on page 21 for exposure information.
Electronic
flash-Set
the synchronized selector at
X. With electronic flash equipment having no lag
in the trip circuit, set the shutter at any speed from
1 second to
1/
500 second.
NOTE
:
Do
not
use units flashed by
means
of heavy-duty re-
lays or
solenoids. Such
units may destroy the
shutter
contacts.
20
Advertisement
Table of Contents
