Traulsen G31000 Specifications

Project
Model Specified:
G-Series Three Section 115V Storage
Freezers/Self-Contained
Equipped with an
easy to use
microprocessor
control!
Standard Product Features
• High Quality Stainless Steel Exterior Front and Doors
• Corrosion Resistant Anodized Aluminum One-Piece Sides
• Durable Anodized Aluminum Interior
• Microprocessor Control With LED Temperature Readout
• Top-Mounted, Balanced, Self-Contained Refrigeration System
• Large High Humidity Evaporator Coil Outside The Food Zone
• Full or Half Length Stainless Steel Doors With Locks
• Self-Closing Doors With Stay Open Feature At 120 Degrees
• Guaranteed For Life Cam-Lift Hinges
• Guaranteed For Life Horizontal Work Flow Door Handle
• Automatically Activated Incandescent Lights
• Damage Resistant Stainless Steel Breaker Caps
• Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)
• Energy Saving Automatic Non-Electric Condensate Evaporator
• Magnetic Snap-In Door Gaskets
• Gasket Protecting Anodized Aluminum Door Liner
• Anti-Condensate Door Perimeter Heaters
• Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times
• Stainless Steel One-Piece Louver Assembly
• 9' Cord & Plug Attached
• Set of Four (4) 6" High Casters With Locks
• One Year Parts And Labor Warranty
• Five Year Compressor Warranty
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.
Model G31010
TRAULSEN
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
Website: www.traulsen.com
Quantity
Three Section Models, 32" Deep
Traulsen's G-Series product line also includes three section reach-in
G
storage freezer models designed to operate at 115V. These models
are available with either full or half length doors and offer the
SERIES
convenience of a variety of different door hingings to choose from.
Stainless Steel
Built with durable exteriors, reliable controls, balanced, efficient
Front & Door(s)
refrigeration systems and a variety of user-friendly features, these
products are the right fit for nearly any application. They are
designed and built to the highest standards, and epitomize the
quality design and construction Traulsen is known for.
Model #
G31000
G31001
G31002
G31003
G31010
G31011
G31012
G31013
Optional Accessory Kits
• Additional Epoxy Coated Shelves*
• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x 26"
or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.
• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)
• Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.
• Chrome Plated Shelves* (for use in lieu of standard shelving)
• 6" High Adjustable Legs (for use in lieu of standard casters)
• Two Year Service/Labor Warranty Available
*Please refer to spec sheet 4-5 for
optional accessory kit details
NOTE: All optional accessory kits are shipped separately for
later installation by others at the jobsite.
Approval: __________________________________
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
AVAILABLE MODELS
Door Hinging
Half Left-Right-Right
Half Left-Left-Right
Half Right-Right-Right
Half Left-Left-Left
Full Left-Right-Right
Full Left-Left-Right
Full Right-Right-Right
Full Left-Left-Left
SECTION
4-4