Table of Contents
Advertisement
CONNECTING
EXTERNAL VIDEO SOURCES
CONNECTING A STEREO VCR OR STEREO LASERDISC PLAYER
1.
Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the "IV set below.
2,
Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack,
3.
Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4.
Press the INPUT button to view the program from the VCR or leserdisc player. The mode VIDEO disappears automatically after
approximately eight seconds.
5,
Press the INPUT button to return to the previous channel.
0
0
0
Backof
VCR
v
L
R
OUTPUT
VCR
Hitachi Model or
Similar Model
Rear Panel of Television
NOTE:
Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if
the connection is loose.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 1 in example
on page 13.) Refer to your VCR operating guide for more information on line input-output connections.
I
18
Advertisement
Table of Contents
