CAUTION:
disassemble the product to prevent
damage to the product.
5. Put the 2 rivets into the 2 holes and install the rivets
with a rivet gun.
6. Put the sensor circuit with the foam gasket into the
sensor bottom cover. Align the white mark on the
sensor with the mark on the sensor bottom cover.
LED indicator of the sensor
LED
LED is on for 1 second.
LED flashes 2 times each second.
6
Use a drill stop or
Operation
Operation
The Husqvarna Fleet Services
nects to the Husqvarna Fleet Services
way app.
The Husqvarna Fleet Services
Husqvarna Fleet Services
7. Use the point of the maintenance tool to carefully
push the foam gasket into position in the sensor
bottom cover.
CAUTION:
of the sensor circuit.
8. Attach the sensor top cover on the sensor bottom
cover clockwise with the maintenance tool.
Note:
Husqvarna recommends you to attach a decal
on the product with the name of the product. This makes
it easier to identify the product in the Husqvarna Fleet
™
Services
app or the Husqvarna Fleet Gateway app.
Note:
You can find more information about how to
install the Husqvarna Fleet Services
in the Husqvarna Fleet Services
Fleet Gateway app.
™
Machine Sensor restarts before it con-
™
app or the Husqvarna Fleet Gate-
™
Machine Sensor is connected to the
™
app or the Husqvarna Fleet Gateway app.
Do not push the center
™
Machine Sensor
™
app or the Husqvarna
2132 - 001 - 19.10.2023