Panel Facilities - Pioneer RX-P840 Service Manual

RX-P840
1.3 PANEL FACILITIES
The illustration shows Multi-voltage model.
®
@ POWER STANDBY/ON switch/STANDBY
indicator
This is the switch for electric power.
ON: When set to the ON position, power is
supplied and the unit becomes oper-
ational.
STANDBY: When set to the STANDBY position,
the main power flow is cut and the unit
is no longer fully operational. A minute
flow of power feeds the unit to main-
tain operation readiness.
@ Remote control sensor (REMOTE SENSOR)
@® TAPE1/2 select button
@ DOLBY* NR select button (B/C/OFF)
*
* Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
° "DOLBY" and the double-D symbol OO are trademarks of
Dolby Laboratories Licensing Corporation.
© TAPE | EJECT port (4)
© Display
@ TAPE Il EJECT port (4)
TAPE 1/2 operating buttons (<<, >>, &, <4, >)
@® Function select indicator
(TUNER, TAPE, CD, MD/AUX)
@ Sound Field Control (SFC MODE)button
@ ASES/COPY button
@ Record/pause button (etl)
@ Microphone jack (MIC) and microphone level
control (MIC LEVEL) (Multi-voltage model
only)
Clock adjust button (CLOCK-ADJ)
@® WAKE-UP button
@ Timer recording button (TIMER REC)
@ TUNING (+, -) button
8 BAND button
@ MEMORY button
@ AUTO TUNING button
@ Frequency/station button (FREQ./STATION)
@ FUNCTION select button (DEMO button)
Each time this button is pressed, the function changes
in the following sequence:
ia TUNER ——® TAPE —* CD
MD/AUX ao
@ P.BASS button
@ VOLUME control
@ Headphone jack (PHONES)