Advertisement
2-10 Front Panel LED Indicators
The three lights on the front panel indicate the status of your TV.
Switch the TV on and off
(
:On,
:Blinking,
TIMER
LAMP
You can use the channel selection buttons to switch on the TV when it is in standby mode
depending on the model.
When using the on-screen menu the volume adjustment and channel selection buttons have
the same function as the .../† /œ/√ buttons on the remote control.
If the remote control no longer works or your have lost it, you can use controls on the panel
of the TV.
Samsung Electronics
LED Indicators
:Off)
STAND BY/TEMP
Standby mode.
A timer pilot lights when Timer Auto On or Off is selected.
Normal operation.
Normal operation (when Timer Auto On or Off is selected).
Lamp is warming up. The normal picture comes on after 25 seconds.
The normal picture comes on after 25 seconds. (when Timer Auto On or
Off is selected)
Air vent cover in the rear of the TV is not properly installed.
Inside temperature of the TV is over normal. Clean the air vent cover in the
rear of the TV. Turn the TV back on after 1 hour.
The lamp does not work, please contact an authorized Service Center for
assistance.
Place the TV in standby mode
Remote Control Sensor
Indication
Alignment and Adjustments
2-43
Advertisement
