Timer Recording - Panasonic DMR-E20 Operating Instructions Manual

1
2
Joystick
1
DVD
VCR Plus+
Q2> Q2_ @
_ Q2_ Q2_
Timer recording
Remote control only
Entering VCR Plus+ codes is an easy way of programming the
timer for recording, You can find these codes in television sections
of newspapers and in television guides• You can enter up to
16 programs up to a month in advance. Each daily or weekly pro-
gram is counted as one program.
Preparation
=Switch [DVD, TV] to "DVD".
eEnsure that this unit's clOCk and guide channels (,,, page 19) are
set correctly.
elnsert a disc for recording (make sure there is enough room for the
program you are going to record plus a little extra).
1
Press [VCR Plus+]. I
2
Press the numbered buttons to enter
1=
1=
the VCR Plus+ code.
If you enter the wrong digit, use the joystick [4] to move back
and enter the correct digit,
(Continued on next page)
II