Panasonic VDR-D100EB Service Manual page 96

Notes in chart
1. Removal of Top Cover Unit
1) Open the LCD and remove the 5 Screws (533).
2) Slide the EVF to extend it, then remove Screw (519).
3) Pull and carefully slide the Top Cover Unit.
Top
Cover
Unit
Open
2. Removal of Front Case Ass'y
1) Open the Jack Cover, then remove Screw (519).
2) Remove the 4 Screws (519, 533).
3) Disconnect the Front F.P.C. from Connector FP2.
4) Remove the Front Case Ass'y while releasing the Hand
Strap.
FP2
Jack Cover
519
519
519
Hand Strap
<Front View>
533
533
Slide
533
519
533
533
Fig. D1
533
533
Fig. D2
3. Installation of Side R & LCD Ass'y
1) Connect the LCD F.P.C. and Side R F.P.C. to the
Connectors FP4 and FP1 so as not to damage the
F.P.C.s.
2) Secure Rear Portion, and tighten 6 Screws (519, 533)
Side R & LCD Ass'y
Slide
Curve to the inside
519
FP4
FP1
533
Rear Portion
519 519
Fig. D3
533
533