INSTALLATION
20
of the refrigerator. Use the three bolts to
attach the hinge.
4
Force-fit the top hinge cover over the top
hinge.
5
Insert the decorative cover on the top right of
the cabinet to cover the holes. Cover is force-
fitted.
NOTE
• After changing doors, make sure that the
corners of the door gaskets are not folded over.
To ensure a good seal, apply a small amount of
silicon grease on the corners
Levelling the Appliance
Adjusting the Levelling Leg
If the appliance seems unsteady, or the doors do
not close easily, adjust the appliance's tilt using the
instructions below.
1
Turn the levelling leg clockwise to raise that
side of the appliance or counterclockwise to
lower it.
2
Open the doors and check to make sure that
they close easily.
NOTE
• Leveling the doors may not be possible when the
floor is not leveled, or is of weak or poor
construction.
• The refrigerator is heavy and should be installed
on a rigid and solid surface.
of the gaskets.
a