Samsung WW10J6 Series User Manual page 50

Troubleshooting
Problem
1C
AC
8C
(MEMS models only)
If any information code keeps appearing on the screen, contact a local Samsung service
centre.
50 English
WW10J6410CX_DC68-03505T-02_EN.indd 50
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• Check Water Level Sensor wire harness.
• If the information code remains, contact a customer service
centre.
NOTE
When the washer displays the "1C" code, the washer do
draining for 3 minutes. During this time, the Power button is
inoperative.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
MEMS sensor problem.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service
centre.
Action
2016/2/25 15:03:44