Bosch BHS4 Series Instructions For Use Manual page 14

en
Fold out picture pages.
Setting up
Version A
Engage the handle in the suction tube.
To remove the handle, press the notch
button and pull the handle out of the
suction tube.
Turn the locking ring on the vacuum
cleaner to position
suction tube in the opening.
Lock the suction tube in place by
turning the ring to position
To remove the suction tube, move the
ring back to position
the suction tube.
Connect the floor tool to the vacuum
cleaner.
Version B
Turn the locking ring on the vacuum
cleaner to position
handle in the opening.
Lock the handle in place by turning
the ring to position
To remove the handle, move the ring
back to position
handle.
Fit the suction tube to the vacuum
cleaner.
Connect the floor tool to the suction
tube.
10
and place the
.
and pull out
and place the
.
and pull out the
1
Figure
Turn the lower cord hook to release
the cord, remove the cord from the
upper cord hook.
Plug in the vacuum cleaner.
2
Figure
Turn the vacuum cleaner on/off at the
switch.
3
Figure
Adjust the suction power by turning
the rotary control.
Vacuuming
4
Figure
Adjusting the floor tool:
Rugs and carpets
hard floors
5
Figure
Vacuuming with accessories
a) Crevice nozzle
For cleaning crevices and corners.
b) Upholstery nozzle
For cleaning upholstered furniture,
curtains, etc.
=>
=>