Toshiba libretto U100 Series Resource Manual page 27

your computer, and for other product information, be sure to
regularly check the Toshiba Web site at
accessories.toshiba.com).
An additional memory module can be installed in the
memory module slot on the base of the computer. You need a
standard Phillips No. 1 screwdriver to install a memory
module.
To avoid damaging the computer's screws, use a standard Phillips
No. 1 screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
The computer has one memory module slot. You can install
one memory module.
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Standby or hibernation mode, data will be
lost.
If the computer is on, begin at step 1, otherwise, skip to
step 3.
1 If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2 Click Turn Off.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer, including the AC adapter cord/cable.
4 Remove the battery.
5 Close the display panel and turn the computer upside
down to locate the memory module slot cover.
Setting up your computer and getting started
27