Darning - Brother 885-U02 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Darning

Fabric that has been torn can be darned.
Darning is sewn as shown below.
a Reinforcement stitching
Determine the desired length of the darning.
a
Set the button guide plate on buttonhole foot
"A" to the desired length. (The distance
between the markings on the presser foot scale
is 5 mm (3/16 inch).)
2
a Presser foot scale
b Length of darning
c 5 mm (3/16 inch)
d 7 mm (1/4 inch)
• A bar tack with a maximum length of about
28 mm (1-1/8 inches) can be sewn.
Attach buttonhole foot "A".
b
• For details, refer to "Replacing the presser
foot" (page 44).
1
3
4
1
58
Select stitch or
c
• For details, refer to "Selecting stitching" (page
51).
d Position the fabric so that the needle is 2 mm
(1/16 inch) in front of the area to be darned,
and then lower the presser foot lever.
1
2
a Tear
b 2 mm (1/16 inch)
Reinforcement Stitching 115
1
59
.
3