Table of Contents
Advertisement
INSTALLATION OF CAMERA
• Mounting from the top
Remove the mount adaptor from the bottom of the
camera as shown. The hole is the standard photo¬
graphic pan-head screw size (1/4' - 20).
Make sure that two original screws are used when
mounting the mount adaptor; longer type screws
may damage inner components.
PREVENTION OF BLOOMING
AND SMEAR
When the camera is faced toward spot light or other
bright lights and light reflecting objects, smear or
blooming may appear. Therefore, the camera should
be operated carefully in the vicinity of extremely bright
objects to avoid smear or blooming.
LENS MAINTENANCE AND
CLEANING
1. Remove the lens, and inspect the camera CCD
faceplate through
the
lens
mount opening to
assure that the faceplate is free of smudges or
particles of dirt.
2. Clean the CCD faceplate, if necessary, using lens
tissue or a cotton tipped applicator and ethanol.
3. Install the new lens.
Advertisement
Table of Contents
