Baking Sensor; Cooking A Dish With Assist - Bosch HRG6769 1B Series Instruction Manual

Dishes
en

Baking sensor

Your appliance is equipped with a baking sensor. This
sensor is automatically activated when you select a
corresponding baked item from the selection list. The
appliance now takes over. The appliance switches off
once the baked item is cooked. An audible signal
sounds. The cooking time is approximately that listed in
the recipe for your baked item and is not displayed.
Do not use any silicone bakeware or accessories that
contain silicone. Otherwise, the baking sensor will be
damaged.
You must not open the appliance door whilst "Baking
sensor active" is shown on the display. Otherwise, the
settings will be cancelled. In this case, the appliance will
provide you with a setting that you must monitor
yourself.

Cooking a dish with Assist

Look through the levels to see which dishes are
available with Assist and whether you need to enter a
weight for your dish. Make sure you weigh your dish
beforehand so that you can do this.
The dishes are arranged in a uniform structure:
Category
■
Food
■
Dish
■
Use the rotary selector to scroll through the individual
levels.
Touch the Menu field.
1.
The list of operating modes are displayed.
Touch the "Assist" text field.
2.
The categories are displayed.
Touch the required category.
3.
The foods in this category are displayed.
Touch the required food.
4.
The individual dishes are displayed.
Touch the required dish.
5.
The settings for this dish appear on the display. For
many dishes, you can change the settings to suit
your needs.
For some dishes, you must set the weight instead.
Press the l Start/Stop button to start.
6.
The cooking time counts down on the display.
The appliance begins to heat up.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating.
When your dish is ready, switch off the appliance using
the ÿ On/Off button.
38
Continue cooking
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears on the display, which asks if you want
to continue cooking. If you want to continue cooking,
touch the "Extend cooking time" text field. A cooking
time is suggested, which can be changed. Press the
l Start/Stop button to start.
You can extend the cooking time as often as
Note:
required.
If you are satisfied with the cooking result, touch the
"Finish" text field.
Press the ÿ On/Off button to switch off the appliance.
Setting a later end time
You can set a later end time for some dishes. Before
starting the appliance, touch the "End" text field and set
a later end time using the rotary selector.
The appliance switches to standby after it is started. The
end time can no longer be changed.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you would like to cancel the operation, switch the
appliance off using the ÿ On/Off button. You can no
longer pause the operation using the l Start/Stop
button.