Adjustingyour Oven Temperature - Kenmore 790.3667 Series Use & Care Manual

Genera Care & C eaning (cont'd)
Changing Oven Light
Be sure the oven is unpUugged and aHparts are COOL before repUacing the oven Hght buUb.Do not turn the
oven Hght on during a seUf-cbaning cycb. High temperature wHU reduce UampHfe.
On some modeUsan interior oven Hght wHU turn on automatbaHy when the oven is opened.
The oven Hght may be turned on when the door is dosed by using the oven Hght switch bcated on the Ebctronb Oven
control
The oven Hght buUbis covered with a gUassshbUd heUdin pUace by a wire hoUder.THIS GLASS SHIELD MUST ALWAYS
BE IN PLACE WHEN THE OVEN IS IN USE.
To Reptace the Light Butb:
BE SURE OVEN IS COOL
1. Turn the power off at the main source.
2. Wear a bather-faced glove for protection against possible broken glass.
3. Replace bulb with a 40 Watt appliance bulb only.
4. Press wire holder to one side to release glass shield, change bulb and be sure to replace
glass shield.
Adjusting the Oven Temperature
Your oven control has been precisely set at the factory, This setting may differ from your previous oven however, so your
recipe times may not give you the results you expect, if you think that the oven is cooking too hot or too cool for your
recipe times, you can adjust the control so that the oven cooks hotter or cooler than the temperature displayed,
To Adjust Oven Temperature:
1,
2.
3.
4,
Press
Set the temperature to 550°F (287°C) by pressing and holding the j%.
Within 2 seconds, press and hold I until the 2 digit display appears. Release The display now indicates the
amount of degrees offset between the original factory temperature setting and the current temperature setting, if the
oven control has the original factory calibration, the display will read "0."
The temperature can now be adjusted up or down 35°F or 17°C, in 5°F or 1°C steps by pressing and holding the ._
or V. Adjust until the desired amount of offset appears in the display. When lowering the oven temperature, a
minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of
degrees.
When you have made the desired adjustment, press ,to go back to the time of day display.
Note: Oven temperature adjustments made will not change the Self-Cleaning feature temperature.
26