Crate VTX200SH User Manual page 5

15 16 17
LEVEL
2
HIGH
CHANNEL 2 - Featuring a medium gain FlexWave circuit for moderate distortion and crunch:
15: CHANNEL 2 SELECT: This switch, when depressed, selects Channel 2 as the active channel. The
adjacent LED illuminates when Channel 2 is active.
16: HIGH: Use this control to adjust the high frequency level of Channel 2.
17: LEVEL: Use this control to adjust the output level of Channel 2.
18: MID: Use this control to adjust the midrange frequency level of Channel 2.
19: GAIN: Use this control to adjust the amount of distortion produced by Channel 2.
20: LOW: Use this control to adjust the low frequency level of Channel 2.
CHANNEL 1 - Featuring a low gain FlexWave circuit for clean sounds or sounds with mild dis-
tortion:
21: CHANNEL 1 SELECT: This switch, when depressed, selects Channel 1 as the active channel. The
adjacent LED illuminates when Channel 1 is active.
22: HIGH: Use this control to adjust the high frequency level of Channel 1.
23: LEVEL: Use this control to adjust the output level of Channel 1.
24: MID: Use this control to adjust the midrange frequency level of Channel 1.
25: GAIN: Use this control to adjust the amount of distortion produced by Channel 1.
26: LOW: Use this control to adjust the low frequency level of Channel 1.
27: INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument
cable.
VTX200SH
Three-Channel Guitar Amp Head with Stereo DSP
18 19 20
GAIN
MID LOW
21 22 23 24 25 26
LEVEL
1
HIGH MID
27
GAIN
INPUT
LOW
STEREO
5