Your New Cooker; Control Panel; Function Selector; Temperature Selector - Siemens HE10AB 20 Series Instruction Manual

Built-in cooker
Table of Contents

Advertisement

appliance door. Always insert the accessories into the
cooking compartment as far as they will go.
Carrying the appliance: do not carry or hold the appliance by
the door handle. The door handle cannot support the weight
of the appliance and could break.

Your new cooker

Here you will learn about your new cooker. The control panel
and the individual operating controls are explained. You will find
information on the cooking compartment and the accessories.

Function selector

Use the function selector to set the type of heating.
Setting
Off position
ý
Top/bottom heating* For cakes, bakes and lean joints of
%
Grill, large area
(
Grill, small area
*
Bottom heating
$
Oven light
^
* Type of heating used to determine the energy efficiency class
in accordance with EN50304.
When you make settings, the oven light in the cooking
compartment switches on.

Temperature selector

The temperature selector is used to set the temperature or grill
setting.
Setting
Off position
Ú
50-270
Temperature
range
Use
The oven switches off.
meat (e.g. beef or game) on one
level. Heat is emitted evenly from
the top and bottom.
For grilling steaks, sausages,
bread and pieces of fish. The
whole area below the grill heating
element becomes hot.
For grilling small amounts of
steaks, sausages, bread and
pieces of fish. The centre part of
the grill element becomes hot.
For preserving, browning and final
baking stage. The heat is emitted
from below.
Switches on the oven light.
Meaning
The oven does not heat up.
The temperature in the cooking
compartment in °C.

Control panel

Here, you will see an overview of the control panel. Depending
on the appliance model, individual details may differ.
Setting
Grill settings
,
,
û
ûû
ûûû
When the oven is heating, the indicator lamp above the
temperature selector lights up. It goes out during heating
pauses.

Hotplate controls

You can use the four hotplate controls to control the heat
output provided by each hotplate.
Setting
Off position
ý
1-9 Heat settings
Automatic zone con-
í
trol
When you switch on a hotplate, the indicator lamp above the
hotplate control lights up.
Meaning
The grill settings for the small
and large
(
area grills.
= setting 1, low
û
ûû
= setting 2, medium
= setting 3, high
ûûû
Meaning
The hotplate is switched off.
The output of the hotplate.
1 = lowest output
9 = highest output
Activates the large dual-circuit hot-
plate or the extended cooking
zone (not available on all hot-
plates).
*
5

Advertisement

Table of Contents
loading

Table of Contents