Individual Safety Switch-Off; Basic Settings - Siemens EH8 FE Series Information For Use

Hide thumbs Also See for EH8 FE Series:
Table of Contents

Advertisement

en Childproof lock
10  Childproof lock
The hob is equipped with a childproof lock. This pre-
vents children from switching on the hob.
10.1 Switching on Childproof lock
Requirement: The hob must be switched off.
Touch and hold
​ ⁠ for 4 seconds.
a The display beside  ​ ⁠ lights up for 10 seconds.
a The hob is locked.
11  Wipe protection
Allows the control panel to be locked for cleaning so
that the settings are not inadvertently adjusted.
The lock has no effect on the main switch.
11.1 Switching on Wipe protection
touch
​ ⁠ . A signal sounds.
a The control panel remains locked for 35 seconds. A
signal tone sounds 5 seconds before the appliance
is switched off.
12  Individual safety switch-off
The safety function is activated if one cooking zone is
in operation for an extended period and you do not
change any settings. The cooking zone displays ​ ⁠ ​ ⁠
and switches itself off.
The time from 1 to 10 hours depends on the selected
power level.
13  Basic settings
You can configure the basic settings for your appliance to meet your needs.
13.1 Overview of the basic settings
Display
Setting
​ ⁠   ​ ⁠
Childproof lock
​ ⁠   ​ ⁠
Audible signals
​ ⁠   ​ ⁠
Energy consumption display
Shows the total energy consumption
between switching the hob on and off in
kWh.
The accuracy of the display depends on vari-
ous factors such as the voltage quality of the
power supply.
1
Factory setting
12
10.2 Switching off Childproof lock
Touch and hold
a The lock is released.
10.3 Automatic childproof lock
You can also activate the childproof lock automatically
every time the hob is switched off.
You can find out how to switch the function on and off
in the "Basic settings" section → Page 12.
11.2 Switching off Wipe protection
To switch off the function early:
touch
​ ⁠ .
a The control panel is unlocked.
Press any button to switch on the cooking zone.
Value
1
​ ⁠ - Manual.
​ ⁠ Automatic.
​ ⁠ – Switched off.
​ ⁠ – Confirmation and fault signals are switched off.
​ ⁠ – Only the fault signal is switched on.
​ ⁠ – Only the confirmation signal is switched on.
​ ⁠ – All signal tones are switched on
1
​ ⁠ – Switched off.
​ ⁠ – Switched on.
​ ⁠ for 4 seconds.
1
.

Advertisement

Table of Contents
loading

Table of Contents