Table of Contents
Advertisement
Operation buttons
This section describes the operation buttons.
Please do not press the buttons too strenuously.
Application 1
Application 2
System indicators
LEDs above icons, light when various computer operations are in progress.
Bridge Media
DC IN
Power
Battery
User's Manual
This button allows you to run applications and
access utilities. An application and a function to
assign can be configured individually.When the
computer is switched off, or is in standby or
hibernation mode, press this button to start the
computer and launch the assigned
application.This button settings can be
changed only by administrator.
System indicators
The Bridge Media indicator glows green when
the computer is accessing the Bridge media slot.
The DC IN indicator glows green when DC power
is supplied from the AC power adaptor. If the
adaptor's output voltage is abnormal or if the
power supply malfunctions, this indicator flashes
orange.
The Power indicator glows green when the
computer is on. If you select Stand by from the
Turn off computer window, this indicator
flashing (one second on, two seconds off) while
the computer Standby mode.
The Battery indicator shows the condition of the
battery's charge: Green indicates full charge,
orange indicates battery charging and flashing
orange indicates a low battery charge. Refer to
Chapter 6,
Power and Power-Up
The Grand Tour
Modes.
2-11
Advertisement
Table of Contents
