Table of Contents
Advertisement
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to: EN60436 ), send an email
to:
info.test@dishwasher-production.com
6. BASIC SETTINGS
You can configure the appliance by changing basic settings according to your needs.
You can also view the number of completed cycles and restore the factory defaults.
Number Setting
1
2
3
4
5
6
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
1 2 3 4 5 6
Values
Water hard‐
1L - 10L (de‐
ness
fault: 5L)
Rinse aid level 0A - 6A (de‐
fault: 4A)
End sound
On
Off (default)
Auto door open On (default)
Off
Key tones
On (default)
Off
Latest pro‐
On
gramme selec‐
Off (default)
tion
In your request, include the product
number code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
1)
Description
Adjust the level of the water softener ac‐
cording to the water hardness in your
area.
Adjust the level of the rinse aid accord‐
ing to the necessary dosage.
Activate or deactivate the acoustic signal
for the end of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the
buttons when pressed.
Enable or disable the automatic selec‐
tion of the most recently used pro‐
gramme and options.
6.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
A
B
A. Previous button
B. OK button
ENGLISH
11
C
Advertisement
Table of Contents
