Table of Contents
Advertisement
•
Fastening the display to a wall or fixed object using cordage or other restraining
devices can help support the weight of the display in order to prevent the
display from falling over.
Hole pattern
(W x H)
100 x 100 mm
or
NOTE:
•
Restraining device/cordage should be able to withstand 100N force.
•
Make sure the cordage is straightened, and any slack is removed. The back
of the device shall face the wall to ensure the device cannot tilt under
external force.
•
Make sure the display does not tilt under external force at any height and
rotation angle of the device.
•
If the existing display is going to be retained and relocated, the same
considerations as above should be applied.
Interface Pad
(W x H x D)
115 x 115 x 2.6 mm
Pad Hole Screw Specification & Quantity
Ø 5 mm
VESA wall moun ng hole
5
M4 x 10 mm
4 pieces
Advertisement
Table of Contents
